Dover Markem-Imaje LASER 7031 - Line Settings and Message Composition

Pre-Installation Installation Training
A70622-D1
103/192
 Line settings configuration
According to a head mounting position and product direction corresponds to an optimum line
settings to ensure highest performance level of the laser equipment.This can be configured using
the ‘LINE SETTINGS’ screen.
 Message composition
In addition of positioning the message on the right edge of the editing windows, following
instructions should be considered when editing the message.
Fields are marked from the last created to the first created (the first created is the last marked)
According to this, it is important to create the message respecting the above rules to ensure an
optimisation of the beam path. This will ensure shortest marking times.
Tacho resolution
:
the sign indicates the
rotation direction of
the encoder
Product Movement
corresponds to the
direction of the product
looking the head facing
the lens. (according to
the direction sticker)
Head Orientation
Determine the reading
direction of the message
1st Field
to be created
Head orientation
2nd Field to be created
1st Field
to be created