Software
A70622-D1
190/192
Updating the laser unit
Downloading Itc Touch folder
Last Itc Touch version can be downloaded from Planet. Load it onto an USB key.
Updating the laser unit
Copy the ItcTouch directory
Recommended when upgrade from software version 5.6 to 5.7.
Before switching ON the controller:
Plug the USB key (containing ItcTouch) into the laser controller.
Start the controller . Exit from the LASER application and go into XP desktop.
Go to IMAJE7000C:\ program files\ItcTouch/Memory card and save customer messages
or fonts (copy/paste in my documents folder for instance)
Copy the new ItcTouch directory from the USB Key D:\ drive.
Delete the old directory stored in IMAJE7000C:\ program files.
Paste the new ItcTouch directory in IMAJE7000C:\ program files.
Go into the recycle bin and select the old ItcTouch directory: Delete it.
Shut down the system and restart. The update is finished.
To Next Page
Loading...