Pre-Installation Installation Training
A70622-D1
72/192
Pre-installation Form
General
The Laser Pre-installation Form has been designed to be a guide for salesmen or Service
Engineers during the pre-installation visit. This visit is strongly recommended in order to
ensure efficient and professional installation.
During the pre-installation visit, it is important to behave like if you have to install the machine:
• Position of the equipment ( laser, cabinet and extraction unit),
• Detection signal and encoder mechanical coupling,
• Mechanical brackets, openings in guarding,
• Availability of mains power, compressed air,
• Electrical connections with customer's equipment.
Don't hesitate to collect all data and fill all fields mentioned in the form in. Add drawings and
digital pictures if possible.
Equipment
It is recommended to be equipped of the following documents:
Laser Sample Request Form of the customer application (QAG108)
Laser Sample Feedback Form delivered by Sampling department (QAG108)
User Manual
It is also recommended to be equipped of the following tools:
Rule (measuring tape)
Digital camera
To Next Page
Loading...