Dover Markem-Imaje LASER 7031 - Page 73

Pre-Installation Installation Training
A70622-D1
73/192
MARKEM-IMAJE REFERENCE
Date: Your Reference:
Subsidiary / Distributor : Country:
Salesman's name : Tel. :
Service Engineer's name : Tel. :
Laser Sample request Form reference :
CUSTOMER REFERENCE
Customer’s Name : Group :
Address :
Sales contact name: Tel. :
Technical contact name: Tel. :
ENVIRONMENT
Ambient temperature max.: °C
Operating Temperature : from 5 to 40°C
Humidity: max.: % dusty wet
Working hours per year: hours
Mains power supply: V (Operating voltage 110/220V)
Application:
New Installation Printer Replacement Model :
LASER MODEL
7031 7031 S 7031 L 7031 HD QS
7031 HD 7031 L HD 7031 S HD 7031 S HD QS
Laser type
7031 L HD QS
Options IP65 (using Air plant) IP65 (using Air cooler) Safety option PLd Pointing diode
Head orientation
90°
0°
Umbilical Standard Umbilical Laser 90 Deg bent
Lens
F75 (50x50) F100 (70x70) F150 (105x105) F175 (120x120)
F200 (140x140 ) F225 (155x155) F250 (175x175) F300 (210x210)
F360 (250X250) F400 (280X280) F482 (340X340) F600 (415X415)
F720 (500X500)
Cable 6m 6m cULus 9m
PRODUCTION LINE DESCRIPTION
Fixed Variable
Maximum speed: m/min Minimum speed: m/min
Conveyor speed
Minimum pitch: mm
Product movement
Right to left Left to right Up to down
Maximum output rates: products/hour
Max nbr of marked products/ month products/month (Necessary for filter consumption calculation)
Note : In movement, the use of a tachometer is strongly recommended to ensure marking quality.