Printer description
A70622-D1
29/192
2/ IP65 using Air Cooler
This type of head is dedicated to work with the FS400 cooling system. The IP65 Aircooler head
have a specific design including two cylindrical tubes located into the lower part of the laser
head. Inside, the structure is composed of an opening which enables the air to be dispatched
following a defined path.
Air is provided by the FS400 pump and is supplied to the head via a hose connected to one of the
cylindrical tube on the head. Air is conducted inside the head thanks to the mechanical design
then is rejected through the second cylindrical connector. This enables to cool down the laser
while ensuring IP65 protection without using air plant.
Note :
Refer to technical bulletin TB120606R2- 7031 HD IP65 AIRCOOLER + FS400 Cooler for
more details.
FS400
cooling
system
To Next Page
Loading...