1.5 - S
TART
PROCESS
Installation Guide DeltaWave
C
HAPTER
1
13
1.5 S
TART
PROCESS
1.5.1 P
REPARATIONS
TO
START
CHECKLIST:
•N
2
/ Air is present.
• Power is present.
• All circuit breakers ON.
• PC program is on.
1.5.2 S
WITCH
ON
1. Choose recipe (ALT C). If not present edit recipe.
2. Reset E-stop/pressure in RESET MENU.
3. Switch on machine in STATUS MENU (ALT S).
4. If timer used switch on timer.
5. Switch on Illumination.
6. Wait until machine is ready.
1.5.3 R
E
-
START
AFTER
STOPPING
The Re-start procedure depends on how the machine was stopped.
To Next Page
Loading...
