Dover Vitronics Soltec DeltaWave 6622cc - 1.2.4 Unpacking

1.2 - T
RANSPORT
Installation Guide DeltaWave
C
HAPTER
1
3
1.2.4 U
NPACKING
The Vitronics Soltec DeltaWave is packed on a wooden pallet.
When necessary, the machine is packed in crates (e.g. when shipped). If packed in crates the fol-
lowing procedure should followed.
F
IGURE
1.3 C
RATE
Use the above figure order A,B,C to uncrate. Other order can result in damaging the machine or
personal injury.
Uncrating order:
1. Take off top cover A.
2. Remove side panels B.
3. Remove front and backcover C.
F
IGURE
1.4 R
EMOVING MACHINE FROM PALLET
The machine is bolted to a wooden pallet with 2 tightening straps (A). Remove these straps.
C
B
A
                    
A
A