Dover Vitronics Soltec DeltaWave 6622cc - 1.7.2 Backplate Setting

I
NSTALLATION
16
C
HAPTER
1
.
F
IGURE
1.17 C
ONTACT GLASSPLATE
-
SOLDER
1.7.2 B
ACKPLATE SETTING
1. Nitrowave: Using the nitrowave the solder has to overflow the backplate during soldering.
Adjust the backplate in such a way that using the glassplate and raising the waveheight as
described above the solder is just overflowing at the backside.
F
IGURE
1.18 A
DJUSTING THE BACKPLATE
Adjust the backplate by turning the screw in the frontside of the solderpot.
Turning screw clockwise = backplate down.
Turning screw counterclockwise = backplate up.