Dover Vitronics Soltec DeltaWave 6622cc - 1.6 End Process; 1.6.1 Preparations to Stop; 1.6.2 Stop Procedures; 1.6.3 Switch Off

I
NSTALLATION
14
C
HAPTER
1
1.6 E
ND PROCESS
1.6.1 P
REPARATIONS TO STOP
Before stopping the machine must be complete empty.
1.6.2 S
TOP PROCEDURES
The machine can manually stopped or by timer. To work with the timer see chapter PC program.
To stop manually follow the following procedure:
1. Switch off (in MACHINE STATUS MENU or with the command keys) the DeltaWave.
2. Switch off Illumination.
1.6.3 S
WITCH OFF
The machine can switch off when the machine is complete empty.
1.6.4 R
E
-
START AFTER
E-
STOP
After E-stop the following procedure should be followed:
1. Reset E-stop button.
2. Reset E-stop.
3. Switch on DeltaWave (in MACHINE STATUS MENU or with the command keys).