Dover Vitronics Soltec DeltaWave 6622cc - 1.7.7 Nozzlefluxer

I
NSTALLATION
20
C
HAPTER
1
1.7.7 N
OZZLEFLUXER
F
IGURE
1.22 C
HECK AIRCAP
1. Check if the nozzle aircap is set correct.
2. Fill the fluxsupply container or place the vessel of the fluxsupplier in the machine.
3. Place the suctionpipe on the vessel/container.
4. Switch on the fluxer.
5. Check the pressure on the pneumatic panel 4.5 bar (2) for the cylinder oscillation and 0.3 bar
(1) for the nozzle air. For adjustment see pneumatic scheme.
F
IGURE
1.23 L
AY OUT PNEUMATIC PANEL