I
NSTALLATION
4
C
HAPTER
1
1.2.5 L
IFTING
WITH
FORKLIFT
When the transporting straps are removed, the DeltaWave can be placed on the place the cus-
tomer has planned it.
To lift and transport the DeltaWave use the figure below. The points where the forks from the
forklift can be placed are shown.
F
IGURE
1.5 L
IFTING
This machine can only be lifted (at the vertical beam) as shown on the figure above.
1.2.6 A
DJUST
LEVELING
PADS
F
IGURE
1.6 L
EVELING
PAD
When the DeltaWave is lifted from the pallet, the following has to be done:
1. Adjust the leveling pad with a maximum of X=15 cm. See Figure 1.6.
Be sure that all leveling pads are inserted with the same length.
DISTANCE BETWEEN
FORKS MINIMUM
800 - 1000 mm
LAYERS
FORK
X
FRAME
M20 NUT
M20 LEVELING PAD
To Next Page
Loading...
