SETTING UP YOUR DR CULTI-PACKER
Unpacking the DR Culti-packer
Parts Supplied:
• Frame and Wheel Assembly
Hardware
Package
Hook
Assembly
Frame and
Wheel
Assembly
• Hook Assembly
• Hardware Package
Tools Needed:
• Pliers
• Utility Knife
1. Cut the plastic away from the box with a Utility Knife.
2. Open the shipping container by pulling the staples
out with pliers and opening the top flaps (Figure 16).
3. Remove the contents to a flat open area.
4. See the unpacked “Major Components” (Figure 17).
Figure 16
NOTE: Do not discard your packaging material until you are
fully satisfied with your new DR CULTI-PACKER.
Major Components
Frame and
Wheel
Assembly
Hook
Assembly
Hardware
Package
Figure 17
CALL TOLL FREE 1-800-DR-OWNER 13
To Next Page
Loading...
