Dräger Atlan A350 XL User Manual

166 Instructions for use | Atlan A300, A300 XL, A350, A350 XL SW 1.0n
Configuration
► Set the date and time in the system setup.
The source for the time synchronization can also be set in the system setup. For
further information, see the following chapter: "Vertical tab "General"", page 176.
11.3 Specifying the start settings
As soon as a vertical tab is selected, entry of the configuration password is required
to access the settings in the System setup dialog.
Observe the information in the following chapter: "Password", page 325.
11.3.1 Adjusting the settings
The following tables show all the setting possibilities in the System setup dialog.
The respective factory defaults are marked in bold format.
11.3.2 System setup > Screen
11.3.2.1 Vertical tab "General"
11.3.2.2 Vertical tab "Views"
Headline/
Parameter
Setting range
Description
Color scheme Day light; Day dark; Night Sets the color scheme. Observe the
information in the following section:
"Daytime colors and nighttime
colors", page 84
Screen bright-
ness
10 to 100
80
Sets the screen brightness.
Headline/
Parameter
Setting range
Description
Rename views 1 Standard; 2 Expert; 3 Expert Defines the name of a view.
Touch the button for the view, enter the
new name on the keyboard, and con-
firm with the button or with the rotary
knob.
Number of wave-
forms (view 3)
3; 4
Default view 1Standard; 2 Expert; 3 Expert Specifies the standard view.
Save as system
defaults
Current view
(only available during operation)
Saves the current screen layout.
All views Saves all screen layouts.

Dräger Atlan A350 XL Specifications

General

Brand	Dräger
Model	Atlan A350 XL
Category	Medical Equipment
Language	English