Page 2 of 4
Electromagnetic Emissions
Electromagnetic Emissions
Babylog 8000 plus is intended for use in the electromagnetic environment specified below. The operator
should assure that is used in such an environment.
Emissions Compliance
according to
Electromagnetic environment
RF emissions (CISPR 11) Group 1 Babylog 8000 plus uses RF energy only for its internal
function. Therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment.
Class A Babylog 8000 plus is suitable for use in all establishments
other than domestic and those directly connected to the
public low-voltage power supply network that supplies
buildings used for domestic purposes.
Harmonic emissions
(IEC 61000-3-2)
Not applicable Not applicable because RF emissions are class A.
Voltage fluctuations / flicker
(IEC 61000-3-3)
Not applicable Not applicable because RF emissions are class A.
Information re electromagnetic emissions (IEC 60101-1-2: 2001, table 201)
To Next Page
Loading...
