28 Instructions for use BiliLux
Operating concept
5.2 Displaying BiliLux screens
The user can display the screens in the table below.
To navigate to the next screen, press the key once. The screens below will
be displayed in succession.
Phototherapy can continue while the user navigates among different screens. After
15 seconds of inactivity (3 minutes on the radiometer screen), the display reverts to
the phototherapy screen.
Screen Function
Phototherapy screen
(default)
Shows the elapsed duration of therapy in hours and
minutes, as well as therapy status (on/off/paused)
Radiometer screen Allows the user to view and store irradiance readings
measured by the radiometer.
Phototherapy report
screen
Allows export of the phototherapy report to a USB
flash drive.
Configuration screen Allows the user to adjust date, time, and language.
Device status screen Displays LED usage in hours, firmware version, and
inspection dates.
008:48008:48
Therapy duration
54.354.3
μW/cm
2
/nm
51.8 μW/cm
2
/nm
15-XXX-2016
10:52
To Next Page
Loading...
Need help?
General
