DRAFT 20 June 2005
Jaundice Meter Instructions for Use (MU01380) Page 4 - 3
Selecting the Unit of Measurement
1. Hold down the Reset button, and turn
on the Power switch. Do not release
the Reset button.
2. While continuing to press the Reset
button, allow approximately 15
seconds for the unit of measurement to
switch from mg/dL to μmol/L, or vice
versa.
3. Ensure that the unit’s display has
changed.
4. Release the Reset button when unit
displays an appropriate unit of
measurement. The Ready lamp
illuminates, indicating that the
instrument is ready to take a
measurement.
5. To change the unit of measurement
once more, turn off the Power switch,
and repeat step 1.
To Next Page
Loading...
