DRAFT 18 May 2005
Page 7 - 2 Jaundice Meter Instructions for Use (MU01380)
Troubleshooting
WARNING:
Only properly trained personnel should troubleshoot the Jaundice
Meter. Troubleshooting by unauthorized personnel could result in
personal injury or equipment damage.
If an abnormality occurs with the Jaundice Meter, perform the
following:
1. Refer to the table below, and take the necessary action given.
2. If the abnormality still appears, set the Power switch to the Off
position, and then return it to the On position.
3. If the abnormality still continues, contact the nearest authorized
service facility, and take the unit out of service.
To Next Page
Loading...
