DRAFT 20 June 2005
Page 2 - 12 Jaundice Meter Instructions for Use (MU01380)
Electromagnetic Compatibility (EMC) Guidance and
Manufacturer’s Declarations
Guidance and Manufacturer’s Declaration—Electromagnetic
Emissions
The Jaundice Meter is intended for use in the electromagnetic envi-
ronments specified below. The customer or user of the unit should
ensure that the unit is used in such environments.
Emissions Test Compliance
Electromagnetic
Environment—Guidance
Radio frequency
(RF) emissions
—CISPR 11
Group 1 The Jaundice Meter uses RF
energy only for its internal func-
tion. Therefore, its RF emis-
sions are very low and are not
likely to cause interference with
nearby electronic equipment.
RF emissions—
CISPR 11
Class B The Jaundice Meter is suitable
for use in all establishments,
including domestic and those
directly connected to the public
low-voltage power supply net-
work that supplies buildings
used for domestic purposes.
Harmonic Emis-
sions—IEC
61000-3-2
Class A
Voltage fluctua-
tions/ flicker
emissions—IEC
61000-3-3
Complies
To Next Page
Loading...
