Dräger Primus - Page 22

Operating concept
Colour concept
Colours are used to highlight operating
sequences and indicate the status of the
soft keys.
Green active, can be operated
Yellow selected, set/confirm
Black leads to another menu
or operating function
Grey not yet active, presettings
Orange current selection
Grey type cannot be operated
Horizontal soft keys
The horizontal soft keys appear green
when operable.
Proceed as follows to set a ventilation
parameter, e.g. PINSP:
@ Push the relevant soft key, the colour
changes from green to yellow =
setting function has been selected.
Te adjust Piysp. 047 and push e.
@ Change, confirm the value = turn,
push the rotary knob. The colour — % Ar MO göz Ar Mo ae
changes from yellow to green, the set |
value has been confirmed and is now
effective.
if
other
set
values
change
automatically
To
adjust
PEEP,
tum
and
push
e.
when setting a parameter, these
changed settings only appear in yellow
in the area around the parameter value.
Keys with presettings which are not yet
active appear in grey.
The selected parameter PINSP is yellow
and can be changed.
Te adjust Pyesp. tum ma push O.
Da age a aa 00
Values shown in grey
— indicate discrepancies between the
values realised by the unit and those
actually set (e.g. following a failure of
the O2 supply, see page 151)
— indicate that the specified accuracy is
not being maintained.
22
Instructions
for
Use
Primus
SW
2.n
0008
0010
0011