Dräger Primus - Page 41

Primus switches to standby after the self
test.
1 Note the information in the complete
test results and the instructions for
further procedure.
2 Allinformation relating to the self test
can be viewed while in standby by
pressing the soft key »self test
results«,
Display:
@ Press the soft key »self test results«.
Instructions for Use Primus SW 2.n
Getting started
14 Jun. 2009 få
Standby 15:05 100%
Primus
SW version 20
Last sejf test: 12 Jun. 08 : 30
Run the self test at least every 24 hours.
The device is tested and ready for
operation. (D
: 을 Ἡ x 45
“breathing system pressure
Enter age and ideal body weight to adjust ventilator and alarm settings.
14 Jun. 2003. 3
15:05 1005.
41
0017