Dräger Primus - Page 85

Selecting the data screen
e Press the ©) key several times
until the data screen appears.
Display (example):
All numerical values are displayed on the
data screen with their units of
measurement.
The bar graph at the bottom of the
screen shows the current ventilation
pressure PAW.
System compliance (CSys) and leakage
(Leaksys) are displayed with other
parameters in the middle left-hand field,
together with the time of the last test.
The bottom right-hand field shows the
pressure values for the central supply of
O2, N20 and AIR, as well as for the O2
and N20 cylinders.
Selecting the trend screen
Displays the measured values over an
interval beginning with the
measurement's commencement.
Maximum time for storage: 8 hours.
The following display combinations can
be selected:
agents
MV/CPAT/CO2/02
SpO>2 pulse (optional)
1
Press the ©). key several times
until the trend screen is displayed.
The trends for MV and compliance are
scaled according to the settings in the
configuration menu.
Display (example): trend for agents.
Selecting other display combinations
© Press the required soft key:
»agents«, »MV/CPAT/CO2/02« or
»SpO2 pulsex
The soft key does not appear if the
SpO2 measuring function is not
available.
The trend for inspiratory and expiratory
values is represented by bar graphs. The
expiratory value is always indicated by a
black line.
Instructions for Use Primus SW 2.n
“Cpat 33.3 miimbar | 4002 38 smi
Monitoring
14 Jun. 2003 ЕЯ
15:05 100
25 mbar | Freq. İZ tn
48 mbar MV 77.2 ыы
1 mr νεα. 0.06 Lin
O. mbar ντ 800 ni
Weight 80 kg 0002 O mete
Age 40 ye. spo 100%
teak test treme un 28:30 | destin 0205 h:mi
Pon os) e
ET er
“8 em 34.
tee 1:1 Trigger =: OFF.
0040
85