Dräger Primus - Page 86

Monitoring
Zoom function
The trend display can be magnified with
the zoom function after half-an-hour's
operation.
To select the area:
e Turn the rotary knob = the dashed
frames move.
To enlarge the selected area to the full
width of the display:
@ Push the rotary knob.
A new dashed frame appears after a
corresponding period of operation
which can also be enlarged.
To return to the trend overview:
@ Press the soft key »total trend« and
the complete trend is displayed
again.
This soft key is ineffective if there are
not sufficient trend data available
(e.g. less than 30 minutes of
operation).
To delete the trend memory
Only possible in standby. Standby
Graphic trend and logbook are :
deleted simultaneously.
In standby mode:
© Press the soft key »delete trend«.
The system requests confirmation that
the trend really shouid be deleted.
To delete:
@
Press the soft key »delete trend«.
FRE SE
05 100
86
14 Jun. 2003 (1)
18.05 100“
Enter age and ideal body weight to adjust ventilator and alarm settings.
Instructions for Use Primus SW 2.n
0020