PROPRIETARY AND CONFIDENTIAL DRAFT 5 Feb 04
4 - 5
Cart and Bassinet
1. Install the rear and side panels on the bassinet.
2. Raise the front panel from its storage slot, and lock it in place.
3. Engage the cart and bassinet to the warmer:
a. Push the cart and bassinet straight onto the warmer until it latches.
b. Pull on the cart and bassinet to ensure that it is latched properly.
4. To disengage the cart and bassinet from the warmer, push and hold the release switch, and pull the
cart and bassinet away from the warmer.
5. Once the warmer and the cart and bassinet are assembled, perform the “Operational Checkout
Procedure” on page 4-14.
To Next Page
Loading...
