Vigor2820 Series User’s Guide
33
Enable Choose Yes to invoke the settings for this WAN interface.
Choose No to disable the settings for this WAN interface.
Display Name Type the description for the WAN1/WAN2 interface.
Physical Mode For WAN1, the physical connection is done through ADSL
port; yet the physical connection for WAN2 is done through
an Ethernet port (P1) or USB port. You cannot change it.
To use 3G network connection through 3G USB Modem,
choose 3G USB Modem as the physical mode in WAN2.
Next, go to WAN>> Internet Access. 3G USB Modem is
available for WAN2. You can enable PPP as the access mode
and complete further configuration.
Physical Type This setting is available for WAN2 only. You can change the
physical type for WAN2 or choose Auto negotiation for
To Next Page
Loading...
