Vigor2830 Series User’s Guide
374
9. Click the tab of Port-based Bridge. Check the box of Enable for the 5
th
WAN. Check
the box of P4. All of the traffic coming from LAN Port 4 will be directed to channel 5
first and then to channel 1.
10. Click OK to save the settings.
11. Now, all the data from P1 transmitted to the remote PPPoE server via WAN1 and the
data from P4 (IPTV) transmitted to the remote DHCP Server via WAN 5 are all
processed by Channel 1.
To Next Page
Loading...
Need help?
General
