Vigor2830 Series User’s Guide
373
6. Click the link of the 5
th
WAN to configure the settings. Choose IPTV as the WAN for
Router-borne Application; check Enable. In the DSL Modem Setup, choose MPoA as
the Protocol; and select 1483 Bridged IP LLC as Encapsulation.
In this case, we want to redirect PVC channel 5 to PVC channel 1, we have to choose 1
as PVC Binding. Check the box of Add Tag and type 405 as the tag number.
7. Click OK to save the settings.
8. The PVC Binding and the Tag setting can also be seen in WAN>>Multi-PVCs>>PVC
to PVC Binding/Add Tag page.
Note: Channel 1 and Channel 2 are reserved for WAN1 service.
To Next Page
Loading...
