Draytek VigorPhone 350 - Network Advanced Settings; NAT;Bridge and NTP Server

27
To configure the VLAN settings, use the soft keys to access the submenu options and perform necessary
functions.
VLAN settings have the following submenu options:
Activation
Select this option to enable/ disable VLAN connection.
Identifier
Select this option to set up VLAN settings ID.
Priority
Select this option to set the priority level (0-7).
2
2
.
.
9
9
.
.
4
4
N
N
A
A
T
T
/
/
B
B
r
r
i
i
d
d
g
g
e
e
This VoIP phone supports NAT/ Bridge setting.
To enable the NAT or bridge function, do the following:
1. Select NAT or Bridge.
2. Press the Select soft key to choose between NAT or Bridge mode. Press the Save soft key to save
your settings.
2
2
.
.
9
9
.
.
5
5
N
N
T
T
P
P
S
S
e
e
r
r
v
v
e
e
r
r
The Network Time Protocol (NTP) is a protocol for distributing the Coordinated Universal Time (UTC)
by means of synchronizing the clocks of computer systems over packet-switched, variable-latency data
networks.
This VoIP Phone supports getting date & time from NTP server or enters date & time manually. To
configure the NTP Server settings, use the soft keys to access the submenu options and perform
necessary functions. NTP Server settings have the following submenu options:
NTP
Select this option to enable/ disable NTP server connection.
Primary Server
Select this option to set the primary server.
Secondary Server
Select this option to set the secondary server.
From the NTP Server submenu:
• Press the Select soft key to select from a list of servers to assign as primary/secondary server.
• Press the Edit soft key to input the server address manually.
Time Zone
Select this option to select time zone settings from a list.
Location
Select this option to select location from a list.