Need help?Do you have a question about the Draytek VigorPhone 350 and is the answer not in the manual?
General| SIP Accounts | 6 |
|---|---|
| Bluetooth | No |
| Wi-Fi | No |
| Speakerphone | Yes |
| Audio Codec | G.711, G.726, G.729, G.722 |
| Network Interface | 10/100 Mbps Ethernet |
| Power over Ethernet | 802.3af |
| Protocols | SIP, RTP, RTCP, DHCP, NTP, HTTP, HTTPS, DNS |
| Headset Port | RJ-9 |
| Power Supply | 12V DC or PoE |
Safety guidelines for device setup, operation, and maintenance.
Step-by-step guide for initial phone setup and connections.
Set codec priority, SIP listen port, and RTP port base.
Set up LAN/PC port connection types and VLAN settings.
Configure NAT/Bridge modes and NTP server for time synchronization.
Steps to connect and log in to the VigorPhone 350 web configuration.
Instructions for upgrading firmware via the web interface.
Configuring extension groups, numbers, and SIP trunks using the IPPBX Wizard.
Detailed steps for downloading and installing firmware for VigorPhone 350.
To Next Page
