Druck PACE - Technical Advice

Copyright 2010 Baker Hughes Company.
2 | PACE Calibration Manual–English
Technical Advice
Contact the manufacturer for technical advice.
Symbols
Symbol Description
This equipment meets the requirements of all relevant European safety
directives. The equipment carries the CE mark.
This equipment meets the requirements of all relevant UK Statutory
In
struments. The equipment carries the UKCA mark.
This symbol, on the equipment, indicates that the user must read the
us
er manual.
This symbol, on the instrument, indicates that the user must refer to the
us
er manual. This symbol, in this manual, indicates a hazardous
operation.
Ce symbole, sur l’instrument, indique que l'utilisateur doit consulter le
ma
nuel d’utilisation. Ce symbole, dans le manuel, indique une situation
dangereuse.
This symbol warns the user of the danger of electric shock.
Ce symbole alerte l’utilisateur sur le danger de choc électrique.
Druck is an active participant in Europe’s Waste Electrical and
El
ectronic Equipment (WEEE) take-back initiative (directive
2012/19/EU).
The equipment that you bought has required the extraction and use of
na
tural resources for its production. It can contain hazardous
substances that could impact health and the environment.
In order to avoid the dissemination of those substances in our
en
vironment and to diminish the pressure on the natural resources, we
encourage you to use the appropriate take-back systems. Those
systems will reuse or recycle most of the materials of your end life
equipment in a sound way. The crossed-out wheeled bin symbol invites
you to use those systems.
If you need more information on the collection, reuse, and recycling
sy
stems, please contact your local or regional waste administration.
Please visit the link below for take-back instructions and more
in
formation about this initiative.
https://druck.com/weee