DSC HS2016

Section 6: Programming Worksheets
[308] Event Reporting
Description on page 101
001 – Miscellaneous Alarm 1
R1 – Duress Alarm
R 2 – Opening After Alarm
R 3 – Recent Closing Alarm
R 4 – Zone Expander Supervisory Alarm
R 5 – Zone Expander Supervisory Alarm Restore
R6 – Burglary Verified
R 7 – Burglary Not Verified Alarm
R 8 – Alarm Cancel
002 – Miscellaneous Alarm 2
R 1 – Holdup Verified Alarm
011 – Priority Alarms 1
R 1 – Keypad Fire Alarm-F Key
R 2 – Keypad Fire Restore
R 3 – Keypad Medical Alarm-M Key
R 4 – Keypad Medical Restore
R 5 – Keypad Panic Alarm-P Key Alarm
R 6 – Keypad Panic Restore
R 7 – Auxiliary Input Alarm
R 8 – Auxiliary Input Alarm Restore
021 – Fire Alarms 1
R 3 – PGM 2 2-Wire Alarm
R 4 – PGM 2 2-Wire Alarm Restore
101 – Tamper Events
R 3 – Module Tamper
R 4 – Module Tamper Restore
R5 – Keypad Lockout
R 7 – Remote Lockout
201 – Open/Close Events 1
R 1 – User Closing
R 2 – User Opening
R 5 – Special Closing
R 6 – Special Opening
R 7 – Keyswitch Opening
R 8 – Keyswitch Closing
202 – Open/Close Events 2
R 1 – Automatic Closing
R 2 – Automatic Disarm
R 3 – Auto Arm Cancellation/Postpone
211 – Miscellaneous Open/Close
Events
R 1 – Late to Close
R 2 – Late to Open
R 5 – Exit Fault
221 – Bypass Events
R 1 – Zone Bypass
R 2 – Zone Unbypass
R 3 – Partial Closing
- 156 -