DSC HS2016 Reference Manual

Appendix 4: Regulatory Approvals
Europe
This product is in conformity with: EMC Directive 2004/108/EC based on results using harmonized standards in accordance
with article 10(5), R&TTE Directive 1999/5/EC based on following Annex III of the directive and LVD Directive 2006/95/EC
based on results using harmonized standards. The product is labelled with the CE mark as proof of compliance with the
above mentioned European Directives. Also a CE declaration of conformity (DoC) for this product can be found at www.d-
sc.com under Agency Listings section.
4.2 Australia / New Zealand Regulatory Compliance Mark
4.3 New Zealand Telepermit Grant
This Digital Security
Controls HS2128 Security
System may be connected
to the Telecom Network
PTC 211 / 13 / 055
TELEPERMIT
RN = 0.5
This Digital Security
Controls HS064 Security
System may be connected
to the Telecom Network
PTC 211 / 13 / 056
TELEPERMIT
RN = 0.5
This Digital Security
Controls HS2032 Security
System may be connected
to the Telecom Network
PTC 211 / 13 / 057
TELEPERMIT
RN = 0.5
This Digital Security
Controls HS2016 Security
System may be connected
to the Telecom Network
PTC 211 / 13 / 058
TELEPERMIT
RN = 0.5
- 210 -

DSC HS2016 Specifications

General

Mounting Type	Wall mount
Power Supply	16.5VAC
Battery Backup	12VDC
Operating Temperature	32°F to 120°F (0°C to 49°C)
Dimensions	267mm