DSC HS2016 - System Testing Procedures

Chapter 4.0 Arming the System
4.2 Exit Delay Time Restart
Thecontrolpanelprovidesanoptionwhere,ifaentry/exitzoneistrippedasecondtimepriortothe
endoftheexitdelay,theexitdelaytimerestarts.Theexitdelaytimercanonlyberestartedonce.
4.3 Alarm Cancel Window
Thecontrolpanelprovidesaperiodoftimeinwhichtheusercancancelthealarmtransmission.
Theminimumdurationofthistimeisfiveminutes.

Iftheprogrammedalarmtransmissiondelayhasexpired,cancelinganalarmsendsamessagetothe
monitoringstation.Uponasuccessfultransmissionofthecancellationmessagethekeypadwillbeep
6times.

Note:Mustbeenabledandconfiguredbyinstaller.

Note:ForCP-01systems,alarmtransmissiondelaymustnotexceed45seconds.
4.4 Using 2-way Wireless Keys and Proximity Tags
2-waywirelesskeysallowusersinthecloseproximityoftheirhousetheabilitytoreadilyarm/dis-
armtheirsystem,andtocallforhelp.Forinformationonenrollingwirelesskeyssee7.1.3"User
Labels(LCDkeypadsonly)".

6
7
1
2
3
4
5
5
2
3
4
1
6
1. AwayArm
2. StayArm
3. Disarm
4. Panic
5. CommandOutput1
6. MessageLED
7. StatusLEDs
1. AwayArm
2. StayArm
3. Disarm
4. Panic
5. CommandOutput1
6. LED
Note:PanicfeaturehasnotbeenevaluatedbyUL.Allwirelesskeybuttonsareprogrammable.
Verifythefunctionsassignedtoeachkeywithyourinstaller.Whenusingcompatiblewirelesskeys
thereisonebellsquawkforarmingandtwobellsquawksfordisarming.
4.4.1 Arming the system with a 2-way wireless key
Ifconfigured,thePowerSeriesNeosystemcanbearmedusingthefollowingwirelesskeys:
l PG4929/PG8929/PG9929
l PG4939/PG8939/PG9939
To Arm the System with a 2-way wireless key
l PressthedesiredArmingmodebuttonanytimethesystemReadyindicatorison.
4.4.2 Arming the System with a Proximity Tag
Ifconfigured,thePowerSeriesNeosystemcanbearmedusingMPTproximitytags.
- 10 -