DSC HS2016 User Guide

Chapter 6.0 Access Code Types
1. Press[*][5]
OR
press[*]andusethescrollkeystonavigatetoAccessCodes
andpress[*].
Press(*)for<>
AccessCodes
2. Enter[Masterorsupervisorcode].
Present Tag or
EnterCode
3. Enter[2digituser#]
OR
scrollthroughthelistofusersandpress[*].OnanLED
keypadtheusernumberwillbeginflashing.
Press (*) for <>
{User Label}
4. TogobacktotheReadystatepress[#].

6.1 Adding, Changing and Deleting Access Codes
Eachconfigureduserisassignedanumberfrom01-95.Accesscodescannotbeduplicated.
To Add or Change User Access Codes LCD Display
1. Fromthedesireduserpress[*]or[1].
Press (*) for <>
Access Code
2. Enteranew4or6digitaccesscode.Afterenteringanew
codeyouwillbeautomaticallyreturnedtothepreviousmenu,
andonanLCDdisplaytheflagischangedtoPfrom-.Onan
ICNorLEDkeypadtheprogrammeduserwillhavetheir
digitsdisplayed.Ifaduplicatecodeisenteredtheerrortone
willsound.
Enter New Code
XXXXXX
then
Press (*) for <>
User Code 03 P
To Delete a User Access Code LCD Display
1. Fromthedesireduserpress[*]or[1].
Press (*) for <>
Access Code
2. Press[*].Thecodeisdeleted,andyouarereturnedtothepre-
viousscreen.Theflagischangedto-fromP.OnanICNor
LEDkeypadtheprogrammeduser’sdigitswillceasebeingdis-
played.
Enter New Code
030516
then
(*) to Edit <>
User Code 03 -
Note:Anyproximitytagsassociatedwithdeletedusercodeswillneedtobere-enrolled.
6.2 Burglary Verification
TheControlPanelincludescrosszoneandsequentialdetectionfeaturesthatrequireatripontwoor
morezoneswithinagiventimeperiod,togenerateaconfirmedalarmandimmediatepolice
response.
Note:Mustbeenabledandconfiguredbyinstaller.
6.3 Swinger Shutdown
TheControlPanelhasaswingershutdownfeaturethatwhenenabledaprogrammablenumberof
tripsshallshutdownthezone.AllburglaryzonetypeshavethisfeatureenabledinCP-01install-
ations.
- 14 -

DSC HS2016 Specifications

General

Mounting Type	Wall mount
Power Supply	16.5VAC
Battery Backup	12VDC
Operating Temperature	32°F to 120°F (0°C to 49°C)
Dimensions	267mm