DSC HS2016 - Securing the Premises; Arming the System with a Keypad

Chapter 4.0 Arming the System
To Arm the System with a Proximity tag
l PresentyourProximitytagtoakeypadequippedwithaproximitysensoranytimethesys-
temReadyindicatorison.
l Ifconfiguredbyyourinstaller,enteryouraccesscode.
4.5 Disarming the System
Dependingonyoursystemconfiguration,therearemultiplemethodsyoucanusetodisarmyoursys-
tem.Youcandisarmthesystemusinga:
l Keypad
l 2-waywirelesskey
l ProximityTag
To Disarm the System with a Keypad
1. Enteryour[accesscode]orpresentyourproximitytaganytimethesystemisarmed.
(Armed indicatorison).
2. Ifyouwalkthroughtheentrydoorthekeypadwillbeep.Disarmwithin_____secondsto
avoidanalarmcondition.
To Disarm the System with a 2-way Wireless Key
1. Pressthedisarmbuttonanytimethesystemisarmed.(Armed indicatorison).
2. Ifyouwalkthroughtheentrydoorthekeypadwillbeep.Pressthedisarmbuttonwithin____
_secondstoavoidanalarmcondition.
Note:AfterdisarmingasystemwithanHS2LCDkeypadusinga2-waywirelesskey,always
checkthealarmmemorytodetermineifanyalarmshaveoccurredduringthearmedperiod.
To Disarm the System with a Proximity Tag
1. PresentyourProximityTagtoakeypadequippedwithaproximitysensoranytimethesys-
temisarmed.(Armedindicatorison)andifconfiguredasrequired,enteryouraccesscode.
2. Ifyouwalkthroughtheentrydoorthekeypadwillbeep.PresentyourProximityTagwithin
_____secondstoavoidanalarmcondition.
Note:DurationofEntrytimerisprogrammedbyinstaller.
4.5.1 Disarming Error
Ifyourcodeisinvalid,thesystemwillnotdisarmanda2-seconderrortonewillsound.Ifthis
occurs,press[#]andre-enteryouraccesscode.
- 11 -