What causes 'Panel Supervision Trouble' on my DSC Cell Phone?
If your DSC Cell Phone displays 'Panel Supervision Trouble', check that section [382] Toggle Option [5] is ON (LTE/3G/Module Enabled). Also, make sure the ribbon cable between the panel and communicator is properly connected (not reversed) and securely in place.
What does FTC Trouble mean on my DSC Cell Phone?
If your DSC Cell Phone displays 'FTC Trouble', it indicates that the unit has exhausted all communication attempts to every programmed receiver for events generated by the communicator. Restart the system. If the trouble persists, contact your dealer.
What to do if my DSC Cell Phone shows 'Receiver Supervision Trouble'?
If your DSC Cell Phone displays 'Receiver Supervision Trouble', and supervision is enabled, it means the unit cannot successfully communicate with the receiver. If this issue continues, contact your central station.
Specifies the installation requirements for UL and ULC listed applications.
Steps for activating the communicator using a Connect24 account and SIM card.
Procedures for initial panel programming to ensure communicator-panel integration.
Details signal strength levels (CSQ) and corresponding installer actions.
Configuration settings for receiver supervision, toggle options, and other system parameters.
Defines settings for test transmissions to primary and secondary receivers.
Displays current network technology and signal strength information.
Explains the 6-digit status codes indicating communicator functionality and troubles.
Details signal strength levels, CSQ, and recommended actions for installation.
General| Resolution | 240 x 320 pixels |
|---|---|
| Expandable Memory | MicroSD up to 8GB |
| Weight | 90g |
| Display | 2.4 inch |
| Battery | 1000 mAh |
To Next Page
