EasyManua.ls Logo

DSC PowerSeries Neo TL8803GI-EU

DSC PowerSeries Neo TL8803GI-EU
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 6 -
Contact information
For additional information and support on Alarm.com modules, initial account setup, home automation, and all
other Alarm.com products and services, please visit: www.Alarm.com/dealer or contact Alarm.com technical
support at: 1-866-834-0470.
Features
l 128-bit AES encryption using cellular and Internet
l Back-up or primary cellular alarm communication and Ethernet port
l Automatically switches to 2G (EDGE/GPRS) if HSPA (3G) service is not available
l Full event reporting to central station
l Cellular periodic test transmission
l Integrated call routing
l Panel remote uploading/downloading support using cellular or Internet
l PC-LINK connection
l Programmable labels
l SIA and Contact ID (CID) formats supported
l Signal strength and trouble display LEDs
l Subscriber Identity Module (SIM) card included with communicator
l Supervision heartbeats sent using cellular
l 2-way audio capable when used with audio module HSM2955(R). - Refer to HSM2955(R) manual
Communicator ratings
Model TL8803GI-EU
Power supply ratings
Input Voltage
11.3 V - 12.5 V DC
(provided by DSC NEO compatible control panel)
Current consumption
Standby Current (Average Value) 100 mA @12 V (I)
Alarm (Transmitting) Current (Peak Value) 200 mA @ 12V (I)
Cellular Network HSPA 3G
Operating Frequency Quad Band GSM/GPRS/EDGE + HSPA in 850/900/2100 MHz
Environmental specifications
Operating Temperature -10°C to 55°C
Storage Temperature -34°C to 60°C
Humidity 93%RH non-condensing
Mechanical specifications
Dimensions 6" x 8.9" x 1.3"
Weight 365 g (I)

Table of Contents

Related product manuals