DSC PowerSeries PC585

Installation
Manual
WARNING
This manual contains information on limitations regarding product use and function and information on the
limitations as to liability of the manufacturer. The entire manual should be carefully read.
PC585
Software Version 2.2C
DLS-3 v1.3 and higher

DSC PowerSeries PC585 Specifications

General

Partitions	1
Communicator	Built-in
Keypads Supported	8
PGM Outputs	2
Power Supply	16.5VAC
Battery Backup	12VDC, 4AH
Operating Temperature	0°C to 49°C (32°F to 120°F)
Humidity	Up to 85% non-condensing
Zones	8

Summary

Getting Started

Alarm System Installation Guide

Guides users through the physical installation process of the alarm panel.

Control Panel Terminal Functions

Explains the function of each terminal on the control panel.

Keybus Wiring and Communication

Details the wiring and communication protocol for system modules.

Zone Wiring and Configuration

Provides guidance on connecting detection devices to the system's zones.

Keypad Commands

System Arming and Disarming

Explains how users can arm and disarm the security system.

Stay Arm Mode and Auto Bypass

System Command Functions

How to Program

Installer Programming Access

Details how installers access and navigate the programming sections.

Decimal Data Entry Guide

Program Descriptions

Security Code Management

Covers setting up master, installer, guard, and user access codes.

Zone Configuration and Types

Details how to define and configure each zone's behavior and type.

Dialer and Communication Setup

Event Reporting Code Configuration

Remote Download and Update Settings

Programmable Output Functionality

Arming and Disarming Feature Settings

Entry and Exit Delay Configuration

Installer Walk Test Procedure