Figure 10. Bottom View of Outdoor Enclosure
3.5.2. Enclosure Mounting
In Figure 11 below, the bottom of the outdoor enclosure is displayed,
featuring holes designed for attaching the included mounting hardware.
The accompanying image to the right demonstrates the enclosure with the
hardware properly secured. The ObservAir's versatile mounting system
offers universal fitment, enabling users to fasten the device using screws,
zip ties, or any other suitable method based on the deployment location.
It is important to note that metal zip ties are the preferred choice;
however, if opting for plastic zip ties, black nylon variants are
recommended to prevent damage caused by exposure to sunlight.
To Next Page
Loading...