How to fix a Dual MXCP44 that won't turn on?
If your Dual Car Receiver isn't turning on, there are several things to check: * Ensure the yellow and red wires are connected and have the correct voltage (11~16VDC). * Verify the black wire is properly connected to ground. * Inspect the fuse and replace it if it's blown.
Why does my Dual MXCP44 keep blowing fuses?
If your Dual Car Receiver keeps blowing fuses, here's what you should investigate: * Check the yellow or red wire for any contact with the chassis ground. Look for pinched wires. * Inspect the speaker wires to ensure they are not touching the chassis ground. Again, check for pinched wires. * Confirm that you are using a fuse with the correct rating.
What to do if my Dual MXCP44 has power but no sound?
If your Dual Car Receiver has power but no sound, try these steps: 1. Check the speaker wire connections at the speakers to ensure they are properly connected. 2. Make sure that no speaker wires are touching each other or the chassis ground. Insulate any bare speaker wires to prevent contact.
What does SD ERR or USB ERR mean on my Dual MXCP44 Car Receiver?
If you see "SD ERR" or "USB ERR" on the display of your Dual Car Receiver, it could be due to: * A compatibility issue with the USB or SD card. Ensure the device capacity is less than 32GB. * An incompatible file system. The file system must be FAT or FAT32.
General| Brand | Dual |
|---|---|
| Model | MXCP44 |
| Category | Car Receiver |
| Language | English |
Advice before beginning the installation process, including battery disconnection and avoiding certain environments.
Steps for initial installation, like removing the unit, installing the sleeve, connecting wires, and securing the trim ring.
Information on replacing the fuse, specifying the correct type and amperage for the MXCP44 unit.
Identifies and describes the function of each numbered control on the front panel of the receiver unit.
Identifies and describes the function of each numbered button on the remote control for the receiver.
Covers faceplate removal, power on/off, and mode selection for various inputs.
Managing display information, using the INFO button, setting the clock, and connecting AUX devices.
How to adjust volume and select preset equalization curves for audio output.
Detailed instructions on adjusting Bass, Treble, Balance, and Fader settings using the volume knob.
How to configure Loudness, Distance Tuning, and Stereo/Mono reception for optimal sound and signal.
Configuration options for audible beeps, geographical area selection, and 12/24-hour clock display.
How to use Seek Tuning and Manual Tuning to find radio stations.
Procedures for saving, recalling, and automatically storing favorite radio stations.
How to perform a preset scan to briefly preview stored radio stations.
Steps for connecting USB devices or SD cards and initiating music playback.
How to navigate tracks, fast forward/reverse, and pause/resume playback of media files.
Instructions for accessing folders and using playback modes like Intro, Repeat, and Random.
Lists compatible and incompatible audio file types, limits on files/folders, and device storage capacity.
Explains playback sequence, folder skipping, and the need for mass storage class and FAT/FAT32 formatting.
How the unit displays file name, song title, artist, and album information from media files.
Instructions for navigating folders and important notes on playing specific file extensions (.mp3, .wma, .wav).
Critical safety advice before drilling or cutting, emphasizing caution with wiring and fuel/hydraulic lines.
Step-by-step guide on how to mount the speaker, including hole cutting, wiring, and grille attachment.
Technical details for FM/AM tuners and the 6.5" dual cone speakers, including frequency response and sensitivity.
Electrical specifications, dimensions, fuse type, line output voltage, and CEA-2006 compliant power ratings.
Solutions for problems such as no power, no sound, blown fuses, and SD/USB error messages.
Information regarding FCC compliance and advice on resolving radio frequency interference issues.
Outlines what is covered under the one-year warranty and lists specific exclusions like installation costs and damage from misuse.
Steps to take for warranty service, including checking troubleshooting, packing, shipping, and contacting customer support.
To Next Page
