"SPEED" setting
This function allows to change the units of
measurement of speed (and hence even the ones of
distance travelled).
The currently set unit of measurement is highlighted
in green on the display; use buttons (1) or (2) to move
the left arrow on the new setting, and press the reset
button (4) to confirm.
If setting is stored, when main screen is displayed
again, the new units of measurement (if any) will be
shown.
1) Km/h: if this unit is set, the following values will
have the same units of measurement:
- TOT, TRIP1, TRIP2, TRIP FUEL: Km
- Vehicle Speed and AVERAGE Speed (SPEED
AVG): Km/h
2) mph: if this unit is set, the following values will
have the same units of measurement:
- TOT, TRIP1, TRIP2, TRIP FUEL: miles
- Vehicle Speed and AVERAGE Speed (SPEED
AVG): mph.
To quit the setting function, press the reset button (4)
with "EXIT" highlighted.
"TEMP" setting
This function allows you to change the units of
measurement of the temperature.
The currently set unit of measurement is highlighted
in green on the display; use buttons (1) or (2) to move
the left arrow on the new setting, and press the reset
button (4) to confirm.
If setting is stored, when main screen is displayed
again, the new units of measurement (if any) will be
shown.
3) °C: if this unit is set, the following values will have
the same units of measurement:
- Engine coolant temperature and T_AIR: °C
4) °F: if this unit is set, the following values will have
the same units of measurement:
- Engine coolant temperature and T_AIR: °F
To quit the setting function, press the reset button (4)
with "EXIT" highlighted.
"CONS." setting
108
To Next Page
Loading...
