This function allows changing the units of
measurement of the Average and Instant Fuel
Consumption.
The currently set unit of measurement is highlighted
in green on the display; use buttons (1) or (2) to move
the left arrow on the new setting, and press the reset
button (4) to confirm.
If setting is stored, when main screen is displayed
again, the new units of measurement (if any) will be
shown.
5) Km/L: if this unit is set, the following values will
have the same units of measurement:
- CONS. and CONS. AVG.: Km/L
6) L/100: if this unit is set, the following values will
have the same units of measurement:
- CONS. and CONS. AVG: L/100
7) mpgal UK: if this unit is set, the following values
will have the same units of measurement:
- CONS. and CONS. AVG: mpgal UK
8) mpgal USA: if this unit is set, the following values
will have the same units of measurement:
- CONS. and CONS. AVG: mpgal USA
To quit the setting function, press the reset button (4)
with "EXIT" highlighted.
109
To Next Page
Loading...
