Ducati Multistrada 620 - Immobilizer Override Procedure

E
20
Special selections function: motorcycle model and
units of measurement (fig. 13)
The engine control unit transmits the correct vehicle
model and unit of measurement information automatically
for the instrument panel to display. To force a change of
these parameters simultaneously press buttons (A, fig. 5)
and (B, fig. 5) and turn the ignition key from OFF to ON.
The display flashes the motorcycle model and version.
Press the button (B) to scroll through available
configurations. To memorise the selection, press and
hold button (A) for at least 5 seconds, until the display
reads out OFF, then turn the ignition key OFF.
Notes
Engine starting is inhibited during this function.
fig. 13