E
58
Checking brake pads for wear (fig. 47)
To facilitate inspection without removing the pads from
the callipers, brake pads have a wear mark. If the grooves
in the friction material are still visible, the pad is still in
good condition.
The rear brake pads must be replaced when about 1 mm
of friction lining (fig. 47a) is still visible through the
opening in the callipers.
Important
Have the brake pads replaced at a Ducati Dealer or
Authorized Workshop.
MTS
620 Dark
MTS
620
MIN
MIN
fig. 47
1 mm
fig. 47a
To Next Page
Loading...
