E
69
Changing the rear turn indicator bulbs
To change the rear turn indicator bulbs, rotate indicator
body (1) by a quarter of a turn so that the glass is upward,
and extract it from indicator mount (fig. 63).
The bulb (2, fig. 63a) is of the bayonet-type: press and
twist counter-clockwise to remove. Change the bulb and
refit by pressing and turning clockwise until it locates
into its seat with an audible click. Refit indicator body (1)
to its mount and rotate by a quarter of a turn.
1
1
fig. 63
1
2
fig. 63a
To Next Page
Loading...
