E
84
Brakes
Front
Double drilled disc and floating calliper.
Flange material:
steel.
Braking surface material:
steel.
Disc diameter:
300 mm. - 320 MTS 620 DARK SD
Hydraulically operated by a control lever on right handlebar.
Braking surface:
48 cm
2
- 44 cm
2
MTS 620 DARK SD.
Make of brake callipers:
BREMBO
Type:
PF 2x28 floating - P 30/34 MTS 620 DARK SD.
Friction material:
FERIT I/D 450
Master cylinder type:
with built-in reservoir.
PS 15/22 - PS 13 MTS 620 MTS 620 DARK SD.
Rear
With fixed drilled steel disc.
Flange material:
steel.
Braking surface material:
steel.
Disc diameter:
245 mm.
Hydraulically operated by a pedal on R.H. side.
Braking surface:
32 cm
2
.
Make:
BREMBO
Type:
P32 F
Friction material:
FERIT I/D 450 FF.
Master cylinder type:
PS 11C.
Warning
Brake fluid is corrosive. In the event of accidental
contact with eyes or skin, wash the affected area with
abundant running water.
To Next Page
Loading...
