The relevant window (C, Fig 96) is displayed with the
following controls available:
●
On or to activate or deactivate the meter
(D, Fig 97)
●
play or pause to or stop the distance
calculation (E, Fig 97)
●
reset to reset the meter (F, Fig 97)
●
incremental or to change the
distance calculation mode (G, Fig 97)
The meter is displayed in km or miles and with the
arrow indicating the counting mode of the distance
travelled (incremental or
If the function is disabled, only the On control is
active: press ENTER (3) to activate the
function and enable all controls.
When the function is active, pressing the ENTER (3)
briefly allows the individual controls to be
selected: when a control is selected, long press the
ENTER (3) to activate the control.
When the Trip master is paused, the number flashes.
To close the window, press and hold (1) for a
long time. The window can be closed keeping the
function and count active.
Air
24
°C
0
km/h
90
°C
10:34
pm
rpm X1000
4
1
2
3
5
6
7
8
10
12
NN
Gear
Total
Range
2017 km
250 km
ENDURO
On
0.0
km
DTC
DQS
ABS
DWC
3
3
5
On
C
Fig 96
Fig 97
118
To Next Page
Loading...
Need help?
General
