Set date
This function allows the date, in the example
shown here the date format is year/month/day.
●
Use (1) and (2) from the Interactive
Menu to select the menu item and press
ENTER (3).
●
Select the Date and time item and press ENTER
(3).
●
Select the Set date item and press ENTER (3).
The first parameter of the date
(- the year in the example - Fig 150)becomes
selectable and is displayed with two arrows placed
above and below it; the available values for the
displayed parameter are also displayed. Use
(1) and (2) to scroll and select the desired value. Press
ENTER (3) to confirm and move on to the following
parameter.
The arrows and available values appear for the
second parameter, which is the
(month in the example shown here, Fig 151). Use
(1) and (2) to scroll and select the desired
value. Press ENTER (3) to confirm and move on to
the following parameter.
Fig 150
Fig 151
168
To Next Page
Loading...
Need help?
General
