EBC indication
The instrument panel displays EBC current level.
The level can be customised using the Riding Mode
function present in the SETTING MENU.
When in fault, the red "Err" message is displayed
instead of the level.
The Engine Braking Control (EBC) system controls
engine braking when riding with control
completely closed (both when and in a
normal with the same gear engaged, while
braking or not). This system independently adjusts
the valves to ensure a consistent torque
goes back from the wheel to engine during these
stages.
The system allows the rider to set "engine brake”, the
range being from a maximum engine braking with
system set to level 1, and progressively decreasing as
level increases.
System is sensitive at high rpm and
sensitivity gradually decreases as soon as engine
rpm decrease.
EBC is a rider aid that can be used both on the
track and the road. The system is designed to make
riding easier, but in no way relieves the rider of the
obligation to ride responsibly and to maintain a high
standard of riding in order to avoid accidents,
whether caused by his own errors or those of other
road users, through making emergency
manoeuvres, in accordance with the prescriptions of
the road code.
Table of EBC interventions within the Riding Mode:
DQS
EBC
1
N
0
2
3
4
5
6
7
8
9
11
10
12
12:34
PM
DTC
DDA OFF
3
3
U/D
ABS 1
DWCRPM X 1000
km/h
TOT
120 °C
SPORT
Gear
1
km
260
Fig 54
104
To Next Page
Loading...
