Type: Stylema
®
monobloc M4.32, radial mount (ABS
Cornering EVO).
Number of pistons per calliper: 4.
Friction material: BRM11E HH.
Brake lever master cylinder diameter: 18 mm (0.71 in).
REAR
With fixed drilled stainless steel disc.
Disc diameter: 245 mm (9.6 in).
Disc braking 190 sq.
cm (29.45 in
2
).
Brake disc thickness: 5 mm (0.2 in).
Maximum wear on disc thickness: 4.5 mm (0.18 in).
Hydraulically operated by a pedal on RH side.
Brake calliper make: BREMBO.
Number of pistons per calliper: 2.
Calliper piston diameter: 34 mm (1.73 in).
Bosch Cornering EVO ABS as standard.
Friction material: Ferodo Ferit I/D 450 FF.
Master cylinder type: PS 13.
Master cylinder diameter: 13 mm (0.51 in).
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the area with abundant running water.
Transmission
Hydraulically-controlled slipper/self-servo wet
multiplate clutch controlled by the lever on
side of the handlebar.
Drive is from engine to gearbox primary
via spur gears.
Primary drive: 1.80:1
Front chain sprocket/clutch gearwheel ratio: 30/53
6-gear gearbox with Ducati Quick (DQS) up/
down EVO2, gear change pedal on side of
motorcycle.
Gearbox output sprocket/rear chain sprocket ratio:
15/43
Gearbox output sprocket/rear chain sprocket ratio
(Taiwan version only): 15/41
Total gear ratios:
1
st
15/37
2
nd
16/30
3
rd
18/27
4
th
20/25
5
th
22/24
6
th
24/23
Drive chain from gearbox to rear wheel.
Make: chain REGINA 520 ZRDK
214
To Next Page
Loading...
