List of operations and type of inter‐
vention
[set mileage (km/mi) or time interval
*]
Km. x1,000
1 12 24 36 48
Time
(months)
mi. x1,000 0.6 7.5 15 22.5 30
Check final drive (chain, front and rear sprocket) and
sliding shoe wear
Check final drive chain for stretch. Measured val‐
ue:___________
12
Check final drive chain tension and lubrication 12
Check secondary air reeds and replace if necessary -
Check play of steering tube bearings 24
Change front fork fluid 36
Visually check the front fork and rear shock absorber
seals
12
Check for proper tightening of the frame-to-engine fas‐
teners and swinging arm
-
Check the freedom of movement and tightening of the
side stand
12
Check that all gaiters and flexible hoses in view (e.g.
flexible hoses for fuel, brake and clutch fluids, cooling
system, bleeding, drainage, etc.) are not cracked, are
properly sealing and positioned
12
203
To Next Page
Loading...
